blog
Posts tagged Bulb
WARM WHITE 140 LUMEN G4 BASE 10 SMD LED BULB, 1109WW
Jan 10th
- Replacement for a 10 watt halogen bulb using a fraction of the power
- Operating voltage 10 to 30 Volt AC or DC
- Low heat output – reduced air
- Long life – estimated over 50,000 hrs.
- Reduced maintenance / replacement
Product Description
Many of the under cabinet uses a 10 watt halogen bulb with a G4 base. We think that this LED is a direct replacement only using 1/10 of the power. This LED module has 10 surface mount LED’s that are super bright. For about the size of a quarter it produces a big amount of light. This module can be used in almost any application because of its small size and brightness. It can be powered by almost any 12-volt source.
This bulb works for all type of 12V Transforme… More >>
I LOOKING FOR A LIGHTING BULB BASED ON LED? ANY IDEA ABOUT COMMERCIALS SOLUTIONS?
Jan 9th
My friend and I interested in various commercial products for home use as a replacement for regular light bulb, our preferred solution is that it should be based on LED technology.
The perfect thing will be to find a light bulb that is in fact a LED light and can fit any location without any modification, just purchase and install.
C. CRANE VFL PAR 20-LED FLOODLIGHT BULB
Jan 8th
- Less than 3 watts of power
- 2.5 watts
- Works well with dimmer switches
- Focused beam
- UL Listed
Product Description
These LED-based bulbs provide steady illumination at a fraction of the energy-cost of traditional wire filament incandescent bulbs. In addition to being far more efficient, they will also last much longer: they are rated for 60, 000 hours (6+ years!)…. More >>
I WANT A PRACTICAL LED BULB TO REPLACE INCANDESCENTS?
Jan 8th
All I have seen are bulbs that produce 60 lumens, which is barely useful.
COLOR CHANGING LED LIGHT BULB AND REMOTE
Jan 7th
- IR remote can turn bulb on/off and adjust colors, transitions, brightness levels
- Multi-color controlled by remote up to 5 meters away!
- Access to 16 specific colors (including White, Green, Blue, Red, Orange, Yellow, Purple)
- Fits into a standard light bulb socket
- Dimensions: 4″ length x 2″ dia.
Product Description
This is a remarkable color changing bulb. It can display nearly any color and comes with a simple to use remote control. * Advance heat management technology * RGB color * Safe Operation : Equipped with fuse and flame retardant plastics * Waterproof protection : IP 65 * Bulb Shape: PAR30 * Base Type: E27 standard screw-in base * Brightness: 130 lumens * Energy Consumption: 5 watts * Comparable to a 15 watt incandescent bulb * Voltage: 100-240VAC * Color: RGB Full Colo… More >>
IS THERE AN LED LIGHT BULB THAT WILL SCREW INTO A REGULAR LIGHT BULB SOCKET?
Jan 6th
I want to purchase one for my aquarium because they are so much brighter, but I am not sure if ti will screw into a regular light bulb socket or not. Please let me know. Also, which are brighter, incandescents or compact fluorescents?
BRIGHTEST MR11 12V 10 SMD LED BULB WIDE ANGLE, WARM WHITE, 1113WW
Jan 6th
- Bulb Type :MR11 10 White LED G4 Base
- Life time:30,000 Hours / Operating Voltage:12 V AC DC (125 mA)
- Color:White (3200K)
- View Angle:140 Deg/Consumption:2.1 Watt
- Light output:140 Lumen
Product Description
This is our brightest MR 11 bulb. It has 10 high-powered led bulbs, which produce about a 3 watt Luxeon bulb. The light pattern is perfect for illuminating displays or even just adding accent lighting yet it is still bright enough to be used anywhere. LED bulbs are compatible with all types of magnetic transformers but not all electronic transformers. Many electronic transformers require a minimum load which is greater than that provided by LED bulbs. LED bulbs will… More >>
Brightest MR11 12V 10 SMD LED Bulb Wide Angle, warm white, 1113WW
HOW DOES ONE REPLACE AN INDIVIDUAL LED BULB IN A CHRISTMAS LIGHT STRING?
Jan 6th
There are four colors that light two at a time but only three wires.
I was considering taking a bulb(diode) from the end of the string and soldering its leads together, then replacing the one that seems to be out further up the line. Just not sure if this will unbalance anything.
I was considering taking a bulb(diode) from the end of the string and soldering its leads together to continue the circuit, then soldering it in place of the one that seems to be out further up the line. Just not sure if this will unbalance anything.
C. CRANE BNB BRIGHT NIGHT LED NIGHTLIGHT BULB
Jan 6th
- Less than 1 watt of power
- 0.85 watts
- 4 LEDs, but still as bright as a regular nightlight
- Just enough light to see when you need it
- UL Listed
Product Description
Save $40 over 7 Years! Fits Most Standard Night Lights Two Year Warranty!1.3 Watts 5 Bright White LEDS Energy Efficient Cool-RunningLEDS, or “light emitting diodes”, are a major breakthrough in lighting technology. Unlike standard light bulbs, LEDs produce light without heat. Their true benefit is power efficiency and long life. LEDs do not have filaments, like ordinary light bulbs, that break when you drop them.Weight: 0.3 oz. Size: 2″ H x 0.75″ Dia… More >>
LED LIGHT BULB REPLACEMENT FOR CHANDELIERS AND WALL SCONCES THAT CURRENTLY USE 20W INCANDESCENT BULBS?
Jan 6th
Many of the light fixtures in my home use the small Candelabra base bulbs. Even though they use 20-25w per incandescent bulb, that adds up to 50w and 100w for several of the rooms (and chandeliers). ALL of these bulbs have small, individual lamp shades covering the bulbs.
I’ve replaced most of the standard base incandescent bulbs with compact florescent bulbs to save on energy costs, and I want to do the same with these bulbs. I know there are compact florescent bulbs are available in this size, but I am curious about venturing into LED bulb territory even if it costs extra in the short term. I am most interested in long-term savings.
Normally, LED bulbs are used for directional lighting, but with the lamp shades, is it possible to get a similar amount of light? If yes, where can I find these bulbs?